Cleaning Systems

___GMS___ Cleaning systems are made of stainless steel and accoring to the application equipped with entry filter, fine filter system, floor spill pan, draw out tank and hot air dryer.

Description of the machine MC 300

• Cleaning machine and closed cleaning chamber of first-class stainless steel with powerful electrical pump
• Electrical regulation with free programmable cleaning time, thereafter draining time
• Comfortable charging through the cover flap; cover flap with interlock, double-sided rotating nozzle assemblies with spray valve changing system for efficiently cleaning of the stencil on both sides
• Filling of  the machine through the tank opening
• While cleaning, the cleaner gets permanently filtered through the fine filter system
• The stencil cleaning machine is for the Water cleaner GMScleaner SR 7400
• Operating/service from the front side
• Emptying of the machine through a  tap pistol (option)
• Base tube –(option)
• Only 230 V electrical connection

Process sequence MC 300

• place the stencil / soldering frame in the machine
• start the cleaning machine
• washing process starts and shuts down automatically after the selected time has expired
• draining time automatically
• thereafter draining starts
• take off clear and dry stencil / soldering frame

Technical data

• width/depth/height ca:    1120 / 400 / 1050 mm
• basic weight, net ca.                    130 kg
• base tube, outside ca.      1220 x 500 x 60 mm
• wash chamber max. refill capacity ca.:    80 Liter
• electrical connection:        230 V / 16 A / 50 Hz
• noise level:                        60 db
• max. stencil size               755 x 755 x 40 mm

Description and advantages of the GMS MC 4000

• Closed wash chamber of first-class stainless steel
• With electrical drive mechanism and electrical control; idle programmable wash time
• Comfortable charging through the cover flap; cover flap with interlock, double-sided rotating nozzle assemblies with spray valve changing system for efficiently cleaning of the stencil on both sides
• Fine filter body with 20µm fine filter in the purification circuit
• Separate cleaning module; flushing with water  
• Separate plenum chamber with cover flap and connection to the applied discharged air provided; discharged air not mandatory
• A hot-air heating in the separate plenum chamber, bake the stencil effective and fast, make down the plenum chamber of your stencil, with electrical control and timer
• The stencil cleaning machine is for the water cleaner GMScleaner SR 7400
• With a complete wheel-away cleaning middle tank to clear the tank easily at the maintenance or to change the cleaner.
• To drain the machinery with a tap pistol
• Fill the machine above the convertible tank
• Base tube – chamfered outside edge – with gratings standard
• Only 230 V electrical connection

Process sequence MC4000

• place the stencil / soldering frame in the machine
• start the cleaning machine
• washing process starts and shuts down automatically after the selected time has expired
• take out stencil / soldering frame off washing chamber, manual short dipping at the flushing tank ( flushing process )
• point stencil / soldering frame to dry into the drying chamber
• switch on the hot air heating installation
• take off clear and dry stencil / soldering frame

Technical data

• width/depth/height ca:    1380 / 650 / 1080 mm
• basic weight, net ca.:                    140 KG        
• base tube, outside ca.                 1420 x 1150 x 50 mm
• max. refill capacity from wash chamber ca.:        65 litres
• max. refill capacity from flushing tank ca.:        65 litres
• exhaust airstream, on site! ca.:            2,5 m³/min ca.180 Pa
• exhaust air not absolutely essential !
• electrical connection:                    230 V / 16 A / 50 Hz
• noise level:                        62 db?
• max.stencil size                      755 x 755 mm

Cleaning Machine GMS MC 4500

Screan cleaning system

3 - chamber system for the manually conversion of the stencil

Same as MC 4000 but with pneumatic. Screan cleaning with solvent.

Description and advantages of the GMS MC 5000

• Automatically, circle-maintained two step run of process, cleaning and drying
• Stencil cleaning machine and closed cleaning and drying chamber of first-class stainless steel
• Comfortable charging through the cover flap; cover flap with interlock, double-sided rotating nozzle assemblies with spray valve changing system for efficiently cleaning of the stencil on both sides
• With electrical drive mechanism and electrical control; idle programmable wash and drying time
• With powerful electrical pump
• While cleaning, the cleaner gets permanently filtered through the fine filter system
• Drying with GMS flue-curing for an efficient and fast drying
• The stencil cleaning machine is for the Water cleaner GMScleaner SR 7400
• With a complete wheel-away cleaning middle tank to clear the tank easily at the maintenance or to change the cleaner
• To drain the machinery with a tap pistol
• Fill the machine above the convertible tank
• Operating/service from the front side
• No water- and wastewater connection required
• Only 230 V electrical connection and exhaust air connection

Process sequence MC 5000

• place the stencil / soldering frame in the machine
• start the cleaning machine
• washing and drying process starts
• take out clean and dry stencil / soldering frame

Maintenance

• Maintenance only from the front side
• Perfect accessibility of all components
• Filling of the cleaner through the tank and change of filters on the front side
• While opening the fine filter gaskets, they`ll empty themselves with pressure indication

Technical data

• width/depth/height ca:    1380 / 650 / 1080 mm
• basic weight, net ca.:                    140 KG     
• base tube, outside ca.                 1420 x 1150 x 50 mm
• max. refill capacity from wash chamber ca.:        65 litres
• max. refill capacity from flushing tank ca.:        65 litres
• exhaust airstream, on site! ca.:            Rohr 100 mm / 200 m³/h
• exhaust air not absolutely essential !
• electrical connection:                    230 V / 16 A / 50 Hz
• noise level:                        62 db
• max. stencil size                      755 x 755 x 40 mm